is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

How To Fix A Replaced Black Ink Cartridge That Isn’t Working On An Epson Printer


Your Epson printer may fail to print black even after replacing the ink cartridge. Don’t drown yourself in worry since this is a common problem faced by many people. In fact, you might have reached this page with a frustrated voice search for “replaced black ink cartridge not working Epson“.

It mostly happens because your printer does not recognize the replaced ink cartridge or still ‘thinks’ it is empty. The same problem is more likely to occur if you refill the empty cartridge yourself. The article below provides you with a few ways on what to do if the replaced black ink cartridge is not working on your printer.

Common Fixes For Epson Black Ink Cartridge Issues

Checking if you removed the protective tape on your ink cartridge

In most cases, ink cartridges are bought with a protective tape covering the nozzle of the print. The protective tape is usually present to prevent leaking of the ink during shipping or storage. Therefore if you filled your black ink cartridge without removing the tape, your printer would not print.

If you realize that you had not removed the covering tape, remove the ink cartridge and look for the tape and ensure you have removed it. You are also not required to remove any other label or sticker on your cartridge because it seals the cartridge so that the ink may not dry out quickly.

Reset the ink cartridge counter on your Epson printer if the printer still fails to print

In case you refill your ink cartridge and do not reset the cartridge counter, your printer may fail to recognize the new ink cartridge. Similarly, the cartridge counter may also read as empty hence no impression of characters will be formed during printing. An Epson printer usually has a reset feature that enables one to make your machine recognized the newly replaced ink cartridge.

For instance, some Epson models have a reset cartridge counter that requires you to press and hold the eject/lead button or clean button for a few seconds. Gently lift the clamp that secures your cartilage without removing the cartilage from your printer. Then shut the clamp and press the eject/lead button again. Suppose you do not know how to reset your Epson printer; consult your manual on undertaking the resetting process.

Carry out an extended cleaning cycle of your ink cartridges

After following the above steps and still your printer fails to print, check if your ink cartridge may have been in storage for long and might have dried. Therefore running an extended cleaning cycle plays an essential role in helping your printer start recognizing your ink cartridge.

It is normally done by checking for the cleaning button on your printer and pressing it for approximately three seconds. If you do not know how to go about your printer’s cleaning cycle, read your printer’s manual to perfume it effectively. After you are done with the cleaning process is, print a test page to evaluate whether the printer is printing.

Check if you refilled the ink cartridges correctly

Refilling ink cartilages by yourself is cost-effective because refilled ink cartridges have some problems associated with them. However, if you fill your cartridge improperly, the printer will not print. When you refill the ink cartridge, the ink might not flow to the bottom of the reservoir. If you suspect that the refilled ink did not reach the reservoir, you should remove the ink cartridge and add more ink through the exit hole so that the sponge in the cartridge is well soaked.

At other times air bubbles may enter the ink cartridge and alter the flow of ink. In such a case, it is advisable to leave the cartridge unused for around an hour to ensure that all the air bubbles in the ink cartridge can dislodge by themselves. You can also remove the cartridge and hit it against the table to enable the air bubbles to leave if, after trying the first idea, your print still cannot print.

Check if your printer’s head has clogged

Suppose you find out that your printer is not print yet look at your printer head to ensure that it is not clogged. Even though most printers have an automatic cleaning feature on the printer head, you can decide to clean it if it is removable manually. Since the printer head of an Epson printer is known for clogging, you are encouraged to clean the read the printer’s manual to clean the printer’s head properly.

Before running your printer’s printhead cleaning process, ensure no errors are visible on the LCD screen. Hence press the home button on the printer and select setup and then maintenance. After following the above steps, select the printhead nozzle check, and your printer produces a page containing four colored grids to help show the nozzles that might be blocked. If you see some faint lines or gaps, you should select the clean printhead option to have it clean, and if no gaps are observed, then select done. It is important to note that you should never turn off the printer during the cleaning process because doing so may permanently damage that particular unit.

In summary, if you carry out the above procedures perfectly and efficiently and your printer fails to print, then your printer might be having some problems. Therefore replacing it or repairing it may provide a solution to your problem. It is also recommended that you keep the print sample safely to show the problem to ease the repairing process. If these solutions didn’t help- check in with Epson printer support for more information.


Please enter your comment!
Please enter your name here